Building blocks
Parametric generator of typical blocks for printing and on-site assembly. Part of the «Custom shape» catalog.
Product parameters (mm)
Hollow-core wall panel with longitudinal voids for rebar and foam concrete.
Product parameters (mm)
Composition constructor
Assemble a complex construction from multiple blocks. Configure parameters on the left, click Add, then position on the bed.
Printer workspace — Hollow panel1200×200×300 mm · 20 layers
LMB orbit · RMB pan · wheel zoom
Mix: 0,046 m³ (46 L)·Mass: 101 kg·
Print bed AMT S400 (17 × 11 × 10 m), G-code origin at the centre. Same view as the simulator.
G-code lines: 3900Print path (G-code): 76,8 mZ: 8,0…328,0 mmF: 2 400…6 000
G-code validation
Warnings (1)
- No explicit feed-mode (G94) — simulator assumes G94 mm/min
Specification (.json)
All fields valid
Print parameters
Seam snaps to the vertex closest to each loop's own bbox centre.
Print estimate
- Layers
- 20
- Path length
- 76,8 m
- Concrete volume
- 0,046 m³
- ↳ walls
- 0,030 m³
- ↳ ribs (4)
- 0,016 m³
- Concrete weight
- 111 kg
- Print time
- 17 min
Rib adhesion
Selected shape has no internal ribs.